Video Management License. Sets up the video management module that allows to control cameras which are related to DVR and NVR equipements, CCTV matrix or independent IP cameras, visibles in the security network. There is a wide variety of supported manufacturers. Allows to sync the video viewing elements with UnityIS™ automatic alerts.

Printing and Customization License. Sets up the template generation module and printing control, with additional associated options.

Licensed USB connector.

Adaptation board for motor-driven card readers connection to DORLET® controllers. With FW ASDx V140 WIEGAND V110.

The blind front allows to hide the unused slots of the chassis.

Chassis (rack) for assembly of UCAs ASD/2 19'' RACK form factor, allows the installation up to a maximum of 7 devices per chassis.

In case of requesting the extension boards with the ACUs, the box is not necessary; If you want to install expansion boards outside the ACU box, this one is necessary. 2 boards can be installed in each box, one for input and one for output.

Required wiegand adapter for DORLET® AS/3 control units connected with HID® iClass™/multiClass™ SE readers.

The MRDT Display Terminal provides robust communications functionality in a single package. When combined with Mercury’s EP or AP series of intelligent access platforms, the unit brings an interactive link and truly integrated functionality to the terminal, a major plus for end-user convenience and satisfaction. The MRDT combines a 32-character LCD display and a multi-position keypad. Even in challenging settings, the back-lit LCD yields clear information displays. Text is displayed as sent by the controller, providing access and alarm status feedback or other freeform messaging or instructions that the system generates. The keypad features standard numerics and 4 function keys to select display options. Deployed with the Mercury family of access platforms, the MRDT is capable of creating custom tasks with any of the functions keys, which mimic system command console functionality at the doorway. And supporting Wiegand, magnetic stripe and proximity devices, the unit connects to the system via either a 2-wire RS-485 link or a TTL connection. Menu-driven configuration is easily conducted at the keypad.

1-relay board for connection of the TESA® SMARTair™ wall reader with of all kind of electrical strikes. Wiring and power supply 12 - 24 VAC / VDC is required.

TESA® Gateway acts as a link between the PC and the TESA® locks. The gateway collects the information sent by the electronic shields through the nodes. Ethernet connection to the PC, with 12VDC European power adapter. White color.

8-relay board for connection of the TESA® SMARTair™ wall reader with of all kind of elevators. Wiring and power supply 12 - 24 VAC / VDC is required.

2-relay board for connection of the TESA® SMARTair™ wall reader with of all kind of electrical strikes. Wiring and power supply 12 - 24 VAC / VDC is required.

Communications module that allows RS232-Ethernet-RS232 conversion, with adapter so that the AS / 3 control board can communicate via Ethernet. Supports 10/100 BaseT, Full / Haslf Duplex and Autonegotiation. RS-232 ports with DB9 connector, and Ethernet with RJ45. Protocols supported by hardware: TCP, IP, UDP, ICMP, ARP, DLC, MAC, PING. Protocols supported by software: DHCP, HTTP, SMTP.

Expansion board for the ASC ACUs that increases the alarm inputs, allows the connection of an input board through the I2C expansion bus of the ASD ACUs. Includes 32 inputs certified in intrusion grade 3.

ACU board for access control and integration of signals with control over 4 readers with 4 door opening relays. Capacity for 100,000 cards. It has 8 alarm inputs and 8 outputs. Includes power supply and support box. TCP-IP (ETHERNET). All ASD / 4 models comply with the 'Environmental Class III' standard. Grade 4 Access Certified if it is installed as ASD/4-G.

ACU board for access control and integration of signals with control over 2 readers with 2 door opening relays. Capacity for 100,000 cards. It has 8 alarm inputs and 8 outputs. Includes power supply and support box. TCP-IP (ETHERNET). In accordance with "Environmental Class III" standard. Grade 2 Access Certified.

ACU board for access control and integration of signals with control over 1 reader with 1 door opening relay. Capacity for 100,000 cards. It has 4 alarm inputs and 3 outputs. Includes power supply and support box. TCP-IP (ETHERNET). In accordance with "Environmental Class III" standard. Grade 2 Access Certified.

Expansion board for the ACUs of the ASD series that increases the outputs, allows the connection of an output board through the I2C expansion bus of the ASD ACUs. Includes 24 outputs.

It allows to connect up to 4 boards (boards of 1 or 2 lines for 4+N system). Each of the decoder outputs is programmed with a 3-digit MDS address. This address identifies each board connected to each output, differentiating it from the rest of the terminals in the installation. When making a call from the Guard Unit, the MDS address corresponding to the marked home is generated, so that only the decoder that has a programmed output with the generated MDS address will establish communication. The boards connected to a decoder have privacy of the audio communications with respect to the rest of the terminals). DIN-10 rail format to facilitate installation inside an electrical equipment box, or they can be screwed directly onto the wall.

Wiegand controllers allow the access control installation to be provided with anti-sabotage security by incorporating the door opening mechanism and the exit button connection. The controller includes an Infrared programming keyboard for programming and maintenance of the installation. User capacity: 1,000. Access modes: Card, Card or Keyboard (PIN), card + keyboard (PIN). Power: 12Vdc (9-24VDC).

The kit consists of a metal box with power supply, an IP central unit and an I/O expander. Controlled doors can have input or output readers, both FPAC-MAX (RS-485) and Wiegand footprint. Each controlled door has a 0.2 A current output for readers and a 1.0 A current output for door openers and other door devices. The backup battery charging current (optional) can be set to 0.3A or 0.6A. The entire system is powered from the power supply included in the kit. Includes: BOX-IP16 metal box. PWR4D 13.8Vdc power supply. AC-MAX central unit in TCP/IP network. It manages up to 4 doors each door with an input reader, therefore it allows the connection of up to 4 Wiegand readers or 8 FPAC-MAX fingerprint readers (4 input and 4 output). EXP4D I/O Expander.

The kit consists of a metal box with power supply, an IP central unit and an I/O expander. Controlled doors can have input or output readers, both FPAC-MAX (RS-485) and Wiegand footprint. Each controlled door has a 0.2 A current output for readers and a 1.0 A current output for door openers and other door devices. The backup battery charging current (optional) can be set to 0.3A or 0.6A. The entire system is powered from the power supply included in the kit. Includes: BOX-IP15 metal box. PWR2D 13.8V power supply. AC-MAX central unit in TCP/IP network. Manages up to 2 doors each door with one entry reader per door or with entry reader and exit reader per door, therefore it allows the connection of up to 4 Wiegand readers (2 entry and 2 exit) or 4 fingerprint readers FPAC-MAX (2 input and 2 output). EXP2D I/O Expander.

The door controller manages the devices present at each access: reader, door opener, exit button, door sensor, ect ... When installed in the safe area (interior), it allows increasing the security of access to the installation, since This device that operates the opener is out of the reach of manipulations. The door controller supports one reader for input and one for output, and accepts wiegand-26buts or magstrip readers. 12 VDC.